t3

Thursday, November 23, 2017
Text Size
  •          

  • FacebookMySpaceTwitterDiggDeliciousStumbleuponGoogle BookmarksRedditNewsvineTechnoratiLinkedinRSS FeedPinterest

Z

C

S

 

P

a

n

e

l

Instructional Articles

Micro-Trains Military Barracks Build by Modelersguild.com

Building this Z-Scale kit was a real pleasure. The parts fit nicely, the materials were right, this all added up to a very enjoyable build.guild 12 09 08 024

Working with Z-Scale should be a challenge for my vision issues, however that is not the case. The way the kits are made makes it easy to both prepare and assemble such a small model.

The first step to building this kit is sealing the card with flat lacquer, before cutting them from the card sheet. The card is thick enough to handle without too much worry of creasing or bending.b7

Using a #11 blade I cut the wall sections out. Satisfied with the color of the card walls we left them unpainted (for now). For the trim and ground I used a tan and the concrete supports grey acrylic, paint the card in thin coats, card will soak in water based paints so thick coats are not advised.b8

b3
To apply the white glue we used a tooth pick this allowed for a fairamount of accuracy when applying glue to a very small area.

We applied the window and door trims with white glue. Having sealed the card earlier allows time to clean up excess glue. As you can see we areready to start assembling the walls.


Using my supply of handy dandy weights I started gluing the sections together. We first attach the end wall to the side and let the glue set a bit. Once stuck I glued the floor section on and again wait to set. This system of letting the glue set allowed me to build this delicate kit in a way as to not ruin a good connection by moving on to quickly.b6

Using a paint pen I covered the floor of the structure black. Just because thats what I do to models that don't have interiors.b2

I scored the roof panel before bending it.and installed it on the model by applying glue to the walls with a toothpick. then I weight the roof down to dry with a bag of sand.

b4
I cut the simulated roofing materials to shape and creased the ridge. Then spread glue on the roof panel and applied the roofing again with the bag of sand securing it.

 

 

Assembling the stair cases wasn't as hard as we thought it would be. Again using the glue and set technique we took the slow route at building these.The supplied steps were very easy to handle and I had little trouble here.b5

Ron Pare

guild 12 09 08 024

Welcome to Z Central Station!