- Posts: 316
- Thank you received: 175
RailKing RK275
12 years 7 months ago - 12 years 7 months ago #11589
by stonysmith
RailKing RK275 was created by stonysmith
Peter.. thanks so much for sharing the picture. I LIKE the paint job.
I don't have a good place to put "directions" for models such as this:
On the top of the model, between the tanks and the cab is a "comb" shaped peice. That is designed to be cut off. It is a clip that you can attach underneath to the axles on the underside to hold the wheels in either the up or down position. (They actually can be rotated down for street usage, or up for track usage)
I don't have a good place to put "directions" for models such as this:
On the top of the model, between the tanks and the cab is a "comb" shaped peice. That is designed to be cut off. It is a clip that you can attach underneath to the axles on the underside to hold the wheels in either the up or down position. (They actually can be rotated down for street usage, or up for track usage)
Please Log in or Create an account to join the conversation.
12 years 7 months ago - 12 years 7 months ago #11592
by stonysmith
Replied by stonysmith on topic Re: RailKing RK275
You shouldn't have to cut the axles.. but they can be a bit sticky when you first receive it. Also.. all four axles were designed to turn.
Here's a drawing of how the clip is supposed to fit:
Here's a drawing of how the clip is supposed to fit:
Please Log in or Create an account to join the conversation.
Time to create page: 0.218 seconds
